Blogs
Synchronous belt and synchronous wheel installation method
2021-07
With the rapid development of industrial production mechanization, timing belts have also come into people's sight, and are widely used in various types of mechanical transmissions in various industries such as textiles, communication cables, chemicals, metallurgy, instrumentation, food, and automobiles. Today, the editor will give you a brief description of the timing belts and timing belts to pay attention to when installing.
First of all, the synchronous belt transmission is composed of an endless belt with equidistant teeth on the inner peripheral surface and wheels with corresponding anastomosis. It combines the advantages of belt drive, chain drive and gear drive. When rotating, power is transmitted through the meshing of the belt teeth and the tooth grooves of the wheel. Generally, it can work at a temperature of -20°C to +80°C.
Synchronous belt has these characteristics:
1. It has a constant transmission ratio, no sliding during work, and accurate transmission.
2. It has buffering and vibration reduction capabilities, low noise and stable transmission.
3. The transmission efficiency is high, generally up to 98%, and the energy saving effect is remarkable.
4. The transmission ratio range is large, generally up to 10, the linear speed can reach 50M/S, and the transmission power is from a few watts to hundreds of watts.
Precautions when installing the synchronous belt:
1. When the distance between the two pulleys can be moved, shorten the center distance first, and then reset the center distance after the timing belt is installed.
2. When there is a tensioning wheel, the tensioning wheel must be loosened first, and then the tensioning wheel should be installed after the timing belt is installed.
3. When installing the timing belt on the pulley, remember not to use excessive force, or use a screwdriver to pry the timing belt, which may cause the tension in the timing belt to break.
4. When the timing belt is in transmission, the parallelism of the axis of the two pulleys is relatively high, otherwise the timing belt will deviate when it is working, and the appreciation will jump out of the pulley.
The characteristics of the timing belt and the precautions for installation are mentioned here first. I believe everyone has a more or less understanding of the timing belt. If you want to know more about timing belts and conveyor belts, please see the next time to share.
2025-10-21
Tel: 0086-576-83351830
E-mail: 1393879306@qq.com
Add: Beishan Industrial Zone West Development Area, Haiyou Street, Sanmen County, Taizhou City, Zhejiang Province